High Purity Oxygen Generator Apparatus for Medical Use
PRODUCT OVERVIEW
1. ETR Oxygen Generator Discription
With PSA principles, ETR medical PSA oxygen generator can produce 93%±3% purity oxygen gas directly from compressed air. Compared with traditional Bulk liquid oxygen and cylinders oxygen, ETR on-site PSA oxygen generator can reduce cost down to 50 percentages.
Compressed air is purified through the air dryer and filters to a certain level for main generator to work with. Air buffer is incorporated for smooth supply of compressed air thus to reduce fluctuation of compressed air source. The generator produces oxygen with PSA (pressure swing adsorption) technology, which is a time proven oxygen generation method. Oxygen of desired purity at 93%±3% is delivered to oxygen buffer tank for smooth supply of product gas. Oxygen in buffer tank is maintained at 4bar pressure.
2.ETR Oxygen Generator System Advantage
- Highly efficient molecular sieves, making oxygen generation more efficient
- Unique startup concentration maintenance function
- Imported muffler, achieving an operating noise of less than 85dB(A)
- LCD touch screen interface, making setting of operating parameters more convenient
- Integrated pipeline process, providing excellent air tightness
- Intelligent control, enabling remote data transmission.
3. ETR PSA Oxygen Generator WORKING PRINCIPLES
The medical molecular sieve PSA oxygen generator system adopts the international advanced pressure swing adsorption (PSA) technology to form a rapid cycle of pressurization adsorption and depressurization desorption under the conditions of normal temperature and low pressure.
4. Model Selected for oxygen generator
| Item |
Model |
Capacity
(Nm3/h) |
Size (mm)
L*W*H |
Weight
(KG) |
Power
(W) |
Connector |
| Air Inlet |
Oxygen Outlet |
| 1 |
ETO-03 |
2.5-3 |
760×750×1850 |
380 |
60 |
DN15(G1/2") |
DN15(G1/2") |
| 2 |
ETO-05 |
3.5-5 |
760×750×2200 |
450 |
60 |
DN15(G1/2") |
DN15(G1/2") |
| 3 |
ETO-10 |
5.5-10 |
880×780×2400 |
780 |
60 |
DN20(G3/4") |
DN15(G1/2") |
| 4 |
ETO-15 |
10.5-15 |
1070×940×2500 |
1080 |
60 |
DN25(G1") |
DN20(G3/4") |
| 5 |
ETO-20 |
15.5-20 |
1450×950×2500 |
1260 |
60 |
DN32(G11/4") |
DN20(G3/4") |
| 6 |
ETO-25 |
20.5-25 |
1500×1000×2800 |
1480 |
60 |
DN40(G11/2") |
DN25(G1") |
| 7 |
ETO-30 |
25.5-30 |
1500×1000×3000 |
1680 |
60 |
DN40(G11/2") |
DN25(G1") |
| 8 |
ETR-35 |
30.5-35 |
1750×1200×3100 |
1950 |
60 |
DN40(G11/2") |
DN25(G1") |
| 9 |
ETO-40 |
35.5-40 |
1750×1200×3150 |
2150 |
60 |
DN40(G11/2") |
DN25(G1") |
| Note: Customization is acceptable |
SPEC of Model ETO-15 For Reference
| ETO-15 Oxygen Generator |
| Item |
Specification |
Remark |
| Oxygen Capacity |
1-50Nm3/h |
Normal/Standard Condition |
| Oxygen Purity |
93%±3% |
|
| Oxygen Delivery Pressure |
0-4bar |
Adjustable |
| Power Consumption |
0.1-0.2kW |
220V, 50Hz @1Phase |
| Dimensions (mm) |
/ |
Including buffer tanks. Dimensions are approximate. |
| Weight (kg) |
/ |
Weight is approximate. |
| Noise Level |
≤85dB(A) |
1 meter away |
| Compressed Air Specifications |
| Air Flow Rate Required |
As Demand |
Capacity Of The Clean & Dry Air after Pretreatment |
| Pressure |
≥7bar |
Gauge |
| Oil residual Content |
≤0.008PPm |
|
| Particles Size |
≤0.01m |
|
| Pressure Dew Point |
+ 3ºC |
|
| Air Temperature |
5-45 Deg. C |
|
| Design Working Conditions |
| Relative humidity |
20%-100% |
|
| Dust Content In The Air |
≤20mg/m3 |
|
| H2S,SO2 Content In The Air |
≤5ppm |
|
| CO2 Content In The Air |
≤250ppm |
|
| CnHm Content In The Air |
≤20ppm |
|
| Acidic Gases |
Less Than Stimulus
Content And Without Erosive Gases |
Self-governed Room For Air Separation Plant And Far From Acidic Environment is Strongly Recommended |
5. Quality Control Process
ETR Enigineering & Technology,clients can be sure of the quality of ETR solution. ETR uses only the best suppliers and components. And all oxygen generators are tested & commissioned by professional Experts to make sure everything is qualified before they leave the factory.
4. Domestic Cooperated Hospital
ETR has currently cooperated with over 100 hundreds hospital at domestic, while export its medical gas system, etc through its agency all over the world. ETR has rich experience in helping our customers provide integrated solution including before sales direction, consultancy and after-sales installation and maintain, for domestic project detailed information, please check with our sales team.
5. Company Activities
AFTER SALES SUPPORT
1.Warranty &Training
Warranty
The Guarantee/Warranty Period shall be a period of twelve months after on-site startup & commissioning or eighteen months after shipment, whichever occurs first. If any trouble or defect, originating with the design, material, workmanship or operating characteristics of any Goods, arises at any time during GUARANTEE/WARRANTY period, ETR shall, at his own expense and as promptly as possible, make such alterations, repairs and replacements.
On-Site Support
ETR can do paid services of on-site startup, commissioning, installation supervision, training, by providing purchaser with the services of qualified English-speaking
engineer at site. ETR shall obtain all permits and licenses required to perform the services under this Agreement.
Audited Supplier 
){kind=link}