Original Oil Gas separator for Atlas Copco Air Compressor

Product Details
Customization: Available
Material: Chemical Fiber
Application: Industry
Still deciding? Get samples of US$ 160/Piece
Request Sample
Manufacturer/Factory

360° Virtual Tour

Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
32000000 RMB
Plant Area
>2000 square meters
  • Original Oil Gas separator for Atlas Copco Air Compressor
  • Original Oil Gas separator for Atlas Copco Air Compressor
  • Original Oil Gas separator for Atlas Copco Air Compressor
  • Original Oil Gas separator for Atlas Copco Air Compressor
  • Original Oil Gas separator for Atlas Copco Air Compressor
Find Similar Products

Basic Info.

Model NO.
GA5/GA7/GA11/GA18/GA22/GA26/GA30/GA37VSD+
Trademark
Atlas Copco
Origin
China

Product Description

ETR company is the leader of integrated medical gas and engineering solutions in China and our solutions and products have been used for more than 20 countries of the world. In China market, ETR has served for more than 7000 hospitals of 32 provinces with full coverage. it is also UN qualified supplier.

We also supply different brands of air compressor/oxygen booster/pipeline filter original spare parts with good price and good service. Any solutions and original spare parts requirement please contact us freely.

The oil and gas separator adopts the most advanced anti-corrosion and high-efficiency ultra-fine fiber agglomerate as the filter main body. The filter bed of the system filter combines pre-filter layer, superfine fiber layer, support layer, filter layer and gravity sedimentation layer. More models you can contact us.

The product introduction
1. High quality: use international brand, ultra-fine glass fiber filter material with stable performance; reasonable
    multi-stage filter material distribution, small pressure drop, use time 3000H, reduce maintenance cost. Multi-
    layer filter material design, effective control of gas The residual oil amount ≤ 3PPM;
2, high performance: galvanized rust-proof structural parts, fine welding process double-sided adhesive
    application ensures that the oil separator has high mechanical strength, and can work normally at 150 ° C high
    temperature and strong corrosion. A safe electrostatic shielding device that effectively protects the machine.

The use of Atlas oil fine separator
The Atlas oil separator is a component that separates the screw lubricant from the compressed air. Under normal operation, the service life of the oil separator is about 3000 hours, but the quality of the lubricant and the filtration accuracy of the air have a long life. big influence. Visible in harsh environments:
1. It is necessary to shorten the maintenance and replacement cycle of the air filter, and even consider installing a
    front air filter.
2. The oil fine separator needs to be replaced after the expiration or before and after the pressure difference
    exceeds 0.12Mpa. Otherwise, the motor will be overloaded and the fine oil separator will break the oil.

Specific replacement method analysis
1. Remove the control pipe joints installed on the oil and gas tank cover. Remove the oil return pipe from the oil
    and gas tank cover into the oil and gas tank, and remove the upper bolts of the oil and gas tank.
2. Remove the upper cover of the oil and gas tank and take out the oil separator. Remove the asbestos pad and
    dirt adhering to the upper cover.
3, into the new oil fine separator, pay attention to the upper and lower asbestos pads need to be stapled book
    binding, asbestos pad needs to be neatly arranged when pressed, otherwise it will cause the pad.
4. Replace the upper cover, return pipe, and control tubes as they are, and check for leaks.

The replacement of oil
1. Replace the actual use time after the design life time. The oil and gas separation core meter typically has a
    service life of 4000-8000 hours and needs to be replaced after it expires.
2. It is replaced immediately after the clogging alarm within the design life span. The oil and gas separation core
    clogging alarm setting value is usually 0.8-1.0 bar. Hazard of over-use of oil and gas separation core: poor
    separation efficiency, resulting in large fuel consumption and compressed air oil content, affecting the operation
    of the back-end purification equipment and the gas equipment can not work normally; the pressure resistance
    increases after plugging, resulting in the actual exhaust pressure of the unit Increase, the unit energy
    consumption increases; after failure, the glass fiber filter separation material falls into the oil, resulting in
    shortened oil filter life and abnormal wear of the host.
3. The air compressor oil separator is built-in (in the oil and gas tank) and external (similar to the appearance of
     the oil). After the external oil is discharged, directly rotate the old one and replace it with the new one
    (consistent with the oil filter). Built-in to remove the upper end of the oil and gas barrel, the relevant pipeline
    should be removed and replaced with new oil (the initial disassembly can be marked), plus the new screw oil
    and then replaced with new oil, then screw in order The pipeline can be.

The function of the oil separator filter
Oil and gas separator filter: According to the working principle of the screw air compressor, we know that the compressed air contains a lot of oil molecules, and the main function of the oil separator filter is to separate the oil and gas. The separated compressed air enters the next stage, and the oil droplets are concentrated at the bottom of the filter element and returned to the lubrication system via the return line.

The advantages of the original accessories
1. Longer service life
Regular maintenance of your equipment with original spare parts ensures a long life of your unit. We guarantee that each new component has the same good performance as the replaced component.
2. High quality
Our original parts are manufactured to the same exacting standards as the compressors you have installed. These parts have passed the durability test and proved to be your investment guarantee.
3. Reliability and productivity
The use of original parts can radically reduce the risk of downtime, as discontinuation is not only costly, it can also affect product quality, delivery time and profitability. In short, the original parts can make your compressed air unit perform.
4. Energy saving and cost effectiveness
Regular replacement and use of Atlas Copco original parts will result in a longer service life of your compressed air unit and an average pressure drop for energy savings, cost effectiveness and very low cost of ownership. The purpose of large displacement.

Original Oil Gas separator for Atlas Copco Air Compressor

Original Oil Gas separator for Atlas Copco Air Compressor
COMPANY OVERVIEW

1.Basic Information about ETR
Original Oil Gas separator for Atlas Copco Air Compressor

workshop
Original Oil Gas separator for Atlas Copco Air Compressor


2. Company Fair
Original Oil Gas separator for Atlas Copco Air Compressor


Certifications
Our products are passed CE/ISO/SGS certitifaction to make sure all of our products are qualified to the markets.

Original Oil Gas separator for Atlas Copco Air Compressor
Welcome to contact ETR for medical  gas solution,ETR got expertise team to support you.
Original Oil Gas separator for Atlas Copco Air Compressor
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier