Customization: | Available |
---|---|
Application Fields: | Medical, Medical |
Certification: | ISO, ISO, CE, CCC |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Philippines market good quality air compressor oxygen concentrator with medical standard
Descreption of compressor oxygen
1. Four stage compression, completely oil-free
2. Low noise, lower than 75db, meet medical standard
3. Low speed and long service life
4. Simple operation. Employees can operate after simple training
There are two types of cooling, i.e., air cooling and water cooling for the oilless reciprocating piston type high-pressure oxygen compressor, there are single acting type and double acting type in the structure, and there are vertical type, angle type, etc., the series high-pressure oilless oxygen compressor has the features of excellent performance, stable operation, high efficiency and energy conservation and long service life, and is widely used for oxygen cylinder filling, chemical process and plateau oxygen supply, it is used with the oxygen making machine to constitute a simple and safe high-pressure oxygen system.
The friction pair of this series compressor involved in the gas compression does not use thin oil lubrication, the friction seals such as piston ring, guide ring, etc. are made of special materials with self-lubricating properties, its structural advantages are reflected in the following aspects:
1. No thin oil lubrication in the whole compression system, thus avoiding the possibility of contact of oil with high-pressure and high-purity oxygen gas, and ensuring the safe use of the compressor;
2. The whole system does not have lubricating oil supply subsystem. The machine is simple in structure, convenient in control and easy to operate;
3. The whole system has no oil, so there is no pollution to the compressed medium - oxygen gas, and the oxygen gas at the inlet and outlet of the compressor has consistent purity
For Cylinder Filling
Capacity: 1-300Nm3/h
Inlet pressure: 0.3-0.4Mpa
Discharge pressure: 15/20Mpa
Power: 2.5-90kw
The compressor inlet is equipped with a Y-filter; The compressor adopts packing seal.
The maximum average speed of the piston is 0.5 m/s, and the crankshaft speed is 190 r/min.
The compressor valve adopts reed valve, and the valve material is imported Swedish steel strip to ensure long-term stable work under the effect of alternating stress.
The main bearing of the compressor adopts high quality self-sealing type rolling bearing.
No. | Source | Inlet.barg | Outlet.barg | Capacity NM3/hour | Power.KW | Voltage | Connection header.mm | Cooling | Weight | Size.mm | Compressor Grade |
GOW-90/4-150 | Oxygen | 3-4 | 150 | 90 | 30 | 220/380/440/50/60/3 | DN40/DN10 | Water | 1150 | 1850X1600X1600 | 4 |
GOW-100/4-150 | Oxygen | 3-4 | 150 | 100 | 30 | 220/380/440/50/60/3 | DN40/DN10 | Water | 1150 | 1850X1600X1600 | 4 |
GOW-120/4-120 | Oxygen | 3-4 | 150 | 120 | 37 | 220/380/440/50/60/3 | DN50/M22*1.5 | Water | 1350 | 1850X1800X1600 | 4 |
GOW-150/4-120 | Oxygen | 3-4 | 150 | 120 | 45 | 220/380/440/50/60/3 | DN50/M22*1.5 | Water | 1350 | 1850X1800X1600 | 4 |
Medical Gas Supply System Gas Management
The pressure monitoring alarm box is used to monitor the pipeline pressure of the medical center air supply system and respond to pressure changes through a digital microprocessor. When the pressure is higher or lower than the set value, the system will automatically alarm by sound and light, etc., to remind the management to timely process the medical center air supply system.
Comprehensive data collection: monitoring of the source gases and gas-consuming areas in the hospital.
Central monitoring: central monitoring of gas sources and gas-consuming areas, enabling comprehensive data browsing and operation curve analysis.
Fault early warning: abnormal data analysis and trend analysis.
Q: Are you factory or trading company?
A: We are factory specilized in compressor oxygen from year 2003.
Q: Where are you?
A: We are in ChangSha,Hunan province,3 hours from guangzhou by high-speed rail.
Q: Do you accept the small order?
A: Yes, you can contact with us.
Q: Can we put our logo on your products?
A: Yes, we can customized your logo. But the quantity of the items have special requirements.
Q: What certifications do products have for your company?
A: CE, ISO and SGS at present.
Q: Do you provide technical support?
A: Yes, technical support is available after sales,if needed,we will provide our technicist to overseas to service you.