Medical Equipment Price Medical Gas Zone Valve Box for Central Gas Supply System

Product Description

 

1. Meet the standards of GB50751-2012 Technical Specification for Medical GasEngineering;
2.Optional 1-7 gas control which could switch the gas on and off in the ward integrally;
3.With oxygen standby interfaces: oxygen cylinder can be connected to conduct emergency treatment in the area in case of failure of oxygen station.
4.User-friendly design: the operator can observe the gas gauge reading and switch stateof valve through transparent window directly,
5.Arc design of the box body, the gas pipes and pipe fittings are made of degreasedcopper material, with high aesthetic appearance.

 

Medical gas four safety principles:

Continuous gas supply Sufficient flow and pressure Gas identification Gas Quality

 

Medical Gas Supply System Pipelines
 

Pipe Material	The main oxygen pipeline and the branch pipeline into the room are used of defatted purple copper tube or stainless steel tube. The pipeline inside of bed head unit is using degreased copper pipe.
Pipe Setting	The gas riser pipe is designed in the pipeline well. Pipes should be piped when crossing the wall. The pipes installation should be neat and beautiful.
Pipe Connection	Pipe system using welded connection. Metal seals throughout the pipe system connection Horizontal pipe and branch pipe of bed head unit should be with maintenance valve
Pipe Grounding	Medical gas pipelines in medical rooms should be equipotential grounded; mainfold/pipelines etc should be anti-static grounded; Independent grounding resistance should less than 10Ω;
Pipeline Leakage Rate	Leakage test of medical gas pipelines when no terminal components are connected, the hourly leakage rate should not exceed 0.05%. According to Chinese standard GB50751-2012

Medical Gas Supply System Fittings 

Zone Valve Box	Gas Regulator Box	Monitoring alarm box
1,Used to control the on and off of medical gases in the area; 2,1~6 channels of medical gas can be controlled according to user requirements; 3,Silver and copper welding to prevent leakage; 4,Transparent window for easy operation and maintenance; 5,Each gas is marked with a national standard color for easy identification.	1,Used to provide a pressure-stable source of gas for the clinic; 2,With dual circuit design, it can be maintained without stopping the gas; 3,Use a large flow reducer to ensure pressure stability; 4,Emergency door lock device to close the valve in an emergency; 5,Transparent window for easy operation and maintenance;	1,Monitor the pressure of the gas supply, and the pressure is high or low to alarm; 2,Monitor the moisture content/oxygen concentration/CO content in oxygen , giving alarm against any deviation from standard set value. Powerful data post-processing function, real-time storage history; 3,intelligent monitoring, with remote data transfer function;

 

 

Medical Gas Supply System Gas Management

The pressure monitoring alarm box is used to monitor the pipeline pressure of the medical center air supply system and respond to pressure changes through a digital microprocessor. When the pressure is higher or lower than the set value, the system will automatically alarm by sound and light, etc., to remind the management to timely process the medical center air supply system.
 

 

 

Comprehensive data collection: monitoring of the source gases and gas-consuming areas in the hospital.

 

 

 

Central monitoring: central monitoring of gas sources and gas-consuming areas, enabling comprehensive data browsing and operation curve analysis.

 

 

 

Fault early warning: abnormal data analysis and trend analysis.

 

 

Warranty

The Guarantee/Warranty Period shall be a period of twelve months after on-site startup & commissioning or eighteen months after shipment, whichever occurs first. If any trouble or defect, originating with the design, material, workmanship or operating characteristics of any Goods, arises at any time during GUARANTEE/WARRANTY period, ETR shall, at his own expense and as promptly as possible, make such alterations, repairs and replacements.

On-Site Support

ETR can do paid services of on-site startup, commissioning, installation supervision, training, by providing purchaser with the services of qualified English-speaking

engineer at site. ETR shall obtain all permits and licenses required to perform the services under this Agreement. 

 

 

 

FAQ:

Q: Are you factory or trading company?
A: We are factory specilized in making medical equipments from year 2003.

Q: Where are you?
A: We are in ChangSha,Hunan province,3 hours from guangzhou by high-speed rail.

Q: Do you accept the small order?
A: Yes, you can contact with us.

Q: Can we put our logo on your products?
A: Yes, we can customized your logo. But the quantity of the items have special requirements.
 
Q: What certifications do products have for your company?
A: CE, ISO and SGS at present.

Q: Do you provide technical support?
A: Yes, technical support is available after sales,if needed,we will provide our technicist to overseas to service you.